
( What Kind of Bits to Use With BobsCNC Routers )Ĭonventional Cut – Refers to the relationship of the bit rotation to the direction of feed. A climb cut deflects the cutting away from the cut, cutting in the same direction of the feed.Ĭollet – A metal collar that holds the router bit within a spindle nut.Ĭompression Bit – A cutting tool with a combination of up and down shear cutting edges.

#ROUTER TABLE TOOL STEPOVER SOFTWARE#
The ball bearings are secured within the nut assembly by a wiper/shield.īelt Stretch - The natural tendency of drive belts to stretch under load and/or over time which will lead to loss of cutting accuracy.ĬAD – Design software used to create vector or 3D files.( What the Software!?! – BobsCNC)ĬAM – Software that is used to create toolpaths from 2D or 3D designs.( What the Software!?! – BobsCNC)Ĭlimb Cut - Refers to the relationship of the bit rotation to the direction of feed. In simple ball screws, bearings are recirculated within the nut assembly through the use of deflectors that redirect the ball bearings from the end of their path back to the beginning with every rotation of the shaft.

If there is too much clearance between the threads, the threaded rod will slide back and forth inside the nut which will affect the accuracy of the axis it is used on.īall Screw- A means of translating the rotational movement of a stepper or servo motor into linear movement with a minimum of friction and backlash. Arduino- An open-source electronics controller platform based on easy-to-use hardware and software.īacklash- The amount of clearance between the threaded surfaces of bolts, machine screws and nuts to facilitate tightening and loosening of the fastener.
